Materials of the best marks, strict tests, easy and reduced maintenance, make of our WASHER EXTRACTORS, CE Code, a very high quality product.

• Solid frame in high thickness steel, sandblasted and painted with epoxy paint to which are fixed, on high, four suspensions holding the swinging block (washing tank and drum) and permitting to simply set the machine on a base without fixing it.
• Frontal plate COMPLETELY IN STAINLESS AISI 304.
• Drum in stainless steel AISI 304 with frontal partitions, very dense boring also on the internal planes to permit a better circulation of chemical products.
• Handy container for chemical products with 2 stainless steel AISI 316 boxes for powder detergents and 3 PVC boxes for liquid additives. The first stainless steel box is provided with a button which permits its manual functioning in every moment. The container is also provided with a special inlet for the connection to an automatic detergent distributing box.
• Three different levels for each water inlet: hot and cold (third water valve optional).
• Manual functioning with possibility to intervene also during an automatic cycle.
• Safety brake with shoes endowed with pneumatic opening.
• Power supply 400V/3/50 Hz. Auxiliary system 24V.

The The PUNCHED CARD version is provided with a 20 tracks programmer and with two different digital thermo regulators to control the temperature.

The MICROPROCESSOR - PLC Telemecanique and touch screen with mass produced: 35 programs capacity, hot and cold water mixing at a desired temperature, independent temperature in every phase of the cycle, cool down, reduced mechanical action for delicate cycle, gradual raising of the wash temperature, presenting for a connection with a detergent distributing box with 8 inlets.

The WASHER EXTRACTOR is controlled by a CHECK CONTROLL which, in the case of a anomaly, signals to the operator by means of an intermittent sound and a message on the keyboard, the relative cause, stopping the cycle.

The version with ONE MOTOR WITH INVERTER AND TOUCH SCREEN offers the possibility to make personalized washing cycles allowing an optimal rapport between consumptions and performances. This guarantees good savings in taking over the management of the work. The washing cycle is programmed by a “touch screen“ key board with the help of clearly messages which appear from time to time on the monitor.

The operator is helped by a check control which will point out eventual anomalies.

• Possibility to choose both washing and water extraction speed.
• Cut down of the engaged electrical power
• Automatic set of the drum with external door closed
• Reduced maintenance
• Reduced noise in comparison with the washer extractors with three motors

• Third water valve
• Additional drainage to recovery water
• Indirect heating by steam or thermic oil
• Slow extraction (3 motors)
• Automatic set of the drum (3 motors)
• Cool Down (mass produced in the PLC version)
• Litter counter
• Print process data at real time and alarm texts with data and hour. (Only PLC version)
• Connection to ETHERNET network